Powered Eurorack case in aluminium with Padouk wood sides (Afriacan teck).
Handmade in France.
Body is in 1,5mm thick aluminium, hard built and painted (deep black matt) with varnish protection .
The case is 62 mm deep, confortable for most of the modules, (40 mm above power supply which occupy a very small place), yet the case is extremely elegant.
Sliding nuts for mounting modules in the rails.
Power supply: 620 mA at +, - 12 V. 100mA at 5V.
Short-circuit / Overload / Over voltage protected (Recovers automatically after fault condition is removed).
On/Off switch with led "on" indicator and 2.1 mm power adapter jack built-in on the back.
Fixed power distribution board with 10 connectors.
Note : AC wall adapter/tranformer not included. Sold separately. You might alrady have one- It's an ordinary AC/DC wall adapter (recommended specs 12 V from 2A or 3A)